On this page
What does carrier tracking show, and where does it stop?
Carrier tracking shows scans. A package is scanned at pickup, at each hub and at delivery. Between scans, the tracking page shows the last one.
The gaps open at the hand-offs. A luggage shipping company told us it loses sight of bags once the carrier hands them to a local agent, days before they travel on. A medical device rental company loses one or two devices a month after a carrier leaves them at the wrong place. An aviation supplier runs its container program on a spreadsheet, emails and phone calls. Working out where the containers are can take a morning or a whole day.
A shipment tracking device covers those gaps. It rides inside the package, case or container, so it is located wherever it goes, whoever is carrying it.
What does a shipment tracking device need to work?
A cellular tracker finds its own position and sends it over the mobile network, so each unit needs a data plan and a battery that is recharged between trips.
A crowdsourced tag needs none of that. It has no GPS receiver and no modem. It broadcasts a Bluetooth signal, and any phone that passes reports where it heard the tag. These networks are large (Apple counts over a billion iPhone, iPad and Mac devices, and Google over a billion Android devices).
That keeps the tag small and its battery long-lived. A sealed tag runs up to three years on one coin cell, so it rides many round trips with nothing to recharge.
The network matters as much as the tag. The same luggage shipper first tested Bluetooth labels on a much smaller network. Too few phones could hear them, especially at destinations far from town.
Can you put a tracking device in a FedEx, UPS or DHL shipment?
Usually, within limits. The air cargo rules allow a tracking device that is switched on inside a package. A carrier can add its own approval step, and FedEx does.
The rule sits in the IATA Dangerous Goods Regulations. A tracking device placed in a package is outside those regulations when it meets a list of conditions (IATA battery guidance, 2026). These are the main ones. The device is in use during transport. A lithium metal cell holds no more than 1 g of lithium, and a lithium-ion cell no more than 20 Wh. The cell meets the UN test requirements. The device cannot overheat or interfere with aircraft systems.
A tracking device that meets those conditions needs no lithium battery mark or hazard label (IATA guidance, question F.03).
Carriers set their own terms on top. FedEx requires shippers to be pre-approved before sending "tracking devices or tags, or any active device that includes GPS, Bluetooth, Wi-Fi, or cellular capabilities". Its list names each approved device by maker and model, and the Apple AirTag is on it (FedEx device list, September 2026). A tag that is not on the list goes through FedEx's own assessment first, and only current FedEx account holders can ask for one. FedEx adds that its approvals cover only aircraft it owns or operates.
Other carriers and airlines keep their own rules. Ask your account manager before the first tagged shipment, and keep the written answer.
What if the shipment tracking device does not come back?
Some shipments are one-way. A metals supplier tags outbound orders, and the tags stay with the customer. A shipper of valuable parcels discards the tag once the parcel is delivered.
A tracker that is given away has to be cheap. A tag with no modem and no data plan is.
Where the case or container does come back, the tag stays on it for the next trip. A geofence around your dock and each delivery address logs when it arrived and when it left. The returnable asset tracking guide covers measuring those days.
How do you show a customer where their shipment is?
Send a link that shows the shipment on a map. Shippers we work with want their customers to see the shipment for themselves. A map link answers the question without a phone call.
An arrival alert covers the other end. Draw a geofence around the delivery address, and the alert is sent when the tag is next reported inside it. The geofence guide shows how.
Where does the tag go in a package, case or container?
Put the tag where it travels with the goods and cannot be knocked off.
- Parcels and cartons. Put the tag inside the box, among the packing. Cardboard, foam and plastic let the signal through.
- Reusable cases. Fix it inside the lid or in a side pocket, where a strap or pallet wrap cannot reach it.
- Metal containers. Metal weakens the signal, so test before fitting a fleet. An aviation supplier put one tag in a steel document box on a container, and it was still reported. Where a test unit is not reported, move the tag to an outside face.
Send one tagged unit down your own route first. The asset tracking tags guide covers mounting on steel and plastic, and the pallet tracking guide covers pallets and pallet boxes.
What to expect from a tag in a shipment
A tag in a shipment is reported wherever people are near it. Its updates follow the route.
- Depots, airports and towns report often. Sorting hubs, terminals, ports and delivery streets are full of phones. A shipment is reported again each time it reaches one.
- Road, sea and air are the stretches between. A trailer on a highway is reported as it passes traffic and at each stop. A container at sea or a parcel in flight is reported again on arrival.
- Street-level position. The position is that of the phone that heard the tag. Expect the right depot, port or street, not the right shelf.
- Location, not condition. A tag reports where a shipment is and when it arrived. Temperature and shock records stay with your data logger or paperwork.
Frequently asked questions
What is a shipment tracking device?
A shipment tracking device is a small tracker that travels inside a package, case or container and reports where it is. Carrier tracking shows only the scans at pickup, hubs and delivery. A device in the shipment covers the time between them.
Can you put a tracking tag in a FedEx package?
Only a device FedEx has approved. FedEx requires shippers to be pre-approved before sending an active tracker, and lists approved devices by maker and model (FedEx device list, September 2026). The Apple AirTag is on that list. The approvals cover only aircraft FedEx owns or operates.
Do tracking tags need a lithium battery label?
Not when the device meets the IATA conditions for tracking devices in use during transport. Then the package needs no lithium battery mark or hazard label. A carrier can still ask for its own approval, so confirm before the first shipment.
Can a tag track a shipping container at sea?
It is reported at the port before loading and again at the port of arrival, then at each depot and street after that. At sea few phones are near it, so the map shows the last port until the container lands.
How long does the battery in a shipment tracking device last?
A cellular tracker is recharged between trips. A crowdsourced tag runs on its own cell for up to one, three or six years, depending on its size. Nothing is recharged between trips.
How do I know when a shipment has arrived?
Draw a geofence around the delivery address. An arrival alert is sent when the tag is next reported inside it, and the report is kept with its time.
Next step
See where your next shipment goes
Tell us what you ship, how it travels and whether it comes back. We will suggest a tag size and tell you what updates to expect on your routes.
