Asset tracking guide

QR Code Asset Tracking: How It Works and What Happens Between Scans

QR code asset tracking puts a printed code on each asset and updates its record when someone scans it with a phone. It is cheap to start, and it shows what an item is and who scanned it last. It cannot show where the asset went after that scan. Small crowdsourced tags report on their own, so the location stays current when nobody scans. This guide covers both.

On this page
  1. How it works
  2. QR code or barcode
  3. Between scans
  4. Where a tag takes over
  5. Label and tag together
  6. What to expect
  7. FAQ

What is QR code asset tracking and how does it work?

QR code asset tracking is an asset register kept up to date by scanning. Each asset carries a label with a QR code. Scanning the code with a phone opens that asset's record, where the person checks it out, checks it in or changes its location.

A QR code is a two-dimensional barcode, defined in ISO/IEC 18004. A phone camera reads it from any direction, and the code can correct itself when part of it is smeared or damaged (Denso Wave, QRcode.com). That suits labels on tools and cases.

Setting it up takes four steps.

  1. List the assets in a spreadsheet or asset software, one row each, with an ID.
  2. Print a QR label for each ID and fix it to the asset.
  3. Scan the label whenever the asset is handed over, moved or returned.
  4. Count the assets against the list from time to time, by scanning each one you find.

The asset tracking templates page has a free register to start the list.

QR code or barcode for asset tags?

Both identify an asset when scanned. A barcode holds a short number in one row of bars. A QR code holds more in a small square, such as a web address, so a phone camera can open the asset's record straight from the label.

Either way, the record changes only when someone scans.

Why does QR code asset tracking go out of date?

A QR label is passive. It records a place only at the moment someone scans it. After that the record shows the last scan, wherever the asset has gone since.

So the system is as good as the scanning. People we talk to describe the same pattern.

  • Nobody scans. An equipment dealer printed QR labels for its demo fleet. The team that moves the equipment almost never scans it in or out. One person updates locations by hand when colleagues say where something went, and calls the year-end count a nightmare.
  • No time to scan. A school runs a fleet of coaching boats. It told us that getting coaches to scan a code or open an app while launching crews is near impossible.
  • Too many people to train. A hospital software provider told us its hospitals did not want to train thousands of staff to update a location.
  • A label with no scan. A partner that serves equipment lenders told us the lenders mark financed machines with asset stickers. To confirm a machine is still on site, someone has to visit.

The label does its job each time. The scan is the step that gets missed, because it depends on a busy person remembering. The AssetTiger guide covers the same gap in one scanning tool.

How does a tracking tag update without a scan?

A tracking tag reports by itself. It broadcasts a Bluetooth signal, and any phone that passes reports where it heard the tag. Nobody opens an app or scans a label. These networks are large (Apple counts over a billion iPhone, iPad and Mac devices, and Google over a billion Android devices).

The tag is small and needs no wiring or data plan. Its battery lasts up to six years, depending on its size.

What each one records about location. A QR label still identifies the asset when scanned.
QuestionQR code labelTag with tracking software
Where is it now?Where it was last scannedWhere it was last reported, with no scan
Where has it been?A list of scansA dated trail of every report
Did it leave the site?Unknown until the next scanAn alert when it is reported outside the boundary
What if staff forget?The record stays as it wasThe tag keeps reporting

Can you use QR code labels and tracking tags together?

Yes. The QR label says what the item is and who signed for it. The tag says where it is now.

Stick the QR label on the tag or beside it, and one spot on the asset does both jobs. The equipment dealer above plans to keep its inventory software and feed tag locations into it through an API. The data export and API guide shows how.

For tools issued from a crib, the tool crib checkout system guide covers the scan at the counter.

What to expect from tags next to QR labels

A tag reports through the phones that pass it. That shapes what it adds to a scanned register.

  • Updates come from passing phones. A workshop, site or office updates through the working day. A store room updates when people work near it again.
  • Building-level position. The position is that of the phone that heard the tag. Expect the right site or building, and let the label confirm the item.
  • Where, not who. A tag shows where an asset is. The scan record, or a sign-out sheet, stays the record of who has it.
  • Tagged items only. A tag tracks the asset that carries it. Consumables and small parts stay on the scanned stock count.

Frequently asked questions

What is QR code asset tracking?

QR code asset tracking is a register of assets that is updated by scanning. Each asset carries a QR code label, and scanning it with a phone opens the asset's record to check it out, check it in or change its location.

Is QR code asset tracking free?

Close to it. Labels cost little to print, and a spreadsheet or a free asset app can hold the register. The real cost is the time people spend scanning, and the searching when a scan was missed.

Can a QR code track location?

Only at the moment of a scan. A scanning app can save where the phone was when it read the label. The label itself sends nothing, so the location does not change until the next scan.

What is the difference between a QR code and a barcode on an asset tag?

A barcode holds a short number in one row of bars. A QR code holds more in a small square, such as a web address, and a phone camera reads it from any direction. Both identify the asset only when someone scans them.

Do I need a scanner for QR code asset tags?

No. A phone camera reads a QR code, so the phones your team already carries are enough.

What tracks equipment without scanning?

A tracking tag. It broadcasts a Bluetooth signal, and any phone that passes reports where it heard the tag. The map stays current when nobody scans, and the QR label still identifies the item.

Can I put a QR code on a tracking tag?

Yes. Stick the QR label on the tag or beside it. A scan then identifies the item, and the tag shows where it is.

Next step

Find the assets nobody scanned

Tell us what you label today and what goes missing between scans. We will suggest a tag size for each asset and tell you what updates to expect.